Cable coaxial cellflex 1/2″ pulg., LCF12-50J

Aplicaciones

• Applications OEM jumpers, Main feed transitions to equipment, GPS lines, intended for outdoor usage

Estructura

• Cable Type Foam-Dielectric, Corrugated
• Size 1/2″
• Jacket Option Black
• Inner Conductor 4.8mm (0.19)in Copper-Clad Aluminum Wire
• Dielectric 11.3mm (0.44)in Foam Polyethylene
• Outer Conductor 13.8mm (0.54)in Corrugated Copper
• Jacket 15.8mm (0.62)in Polyethylene, PE

Especificaciones Eléctricas

• Impedance50 ohm +/- 1
• Maximum Frequency GHz 8.8
• Velocity % 88.0
• Capacitance 76 pF/m (23.2) (pF/ft)
• Inductance 0.19 μH/m (0.058) (μH/ft)
• Peak Power Rating kW 38.0
• RF Peak Voltage Volts 1950.0
• Jacket Spark Volt RMS 8000.0
• Inner Conductor dc Resistance 1.57 ( ohm/1000m), 0.48 (ohm/ 1000ft)
• Outer Conductor dc Resistance 3.25 ( ohm/1000m), (0.99) (ohm/ 1000ft)
• Return Loss (VSWR) Performance Standard
• Maximum Return Loss dB (VSWR) Contact RFS for your VSWR performance specification for your required frequency band.
• Phase Stabilized Phase stabilized and phase matched cables and assemblies are available upon request.
• Temperature & Power Standard

Especificaciones Mecánicas

• Cable Weight, Nominal 0.187 (kg/m), (0.13) (lb/ft)
• Minimum Bending Radius, Single Bend mm (in) 70 (3)
• Minimum Bending Radius, Repeated Bends mm (in) 125 (5)
• Bending Moment Nm (lb*ft) 6.5
• Tensile Strength 1100N, (247)(lb)
• Recommended / Maximum Clamp Spacing (0.6 / 1 )m , (2 / 3.25) (ft)