productos-banner-dbtc

Consola Digital 2600

Consolas para Estudios de alta performance con superficie de Control AoIP.

Las consolas mezcladoras digitales 2600 son un nuevo concepto en Estudios de Aire para radio y TV. Son instaladas en los estudios analógicos o digitales convencionales aprovechando las mesas y el cableado existentes, para luego ir evolucionando hacia sistemas de Audio sobre IP (AoIP) basados en superficies de control.

De esta manera se aprovecha totalmente su actual inversión en equipos ya instalados y sin modificar estudios existentes.

Pero más adelante por el simple agregado de módulos se puede ir escalando la inversión hacia un estudio digital AoIP. Únicamente Solidyne le ofrece esta tecnología para que sus inversiones crezcan en la medida en que su estación las requiera.

Características Principales

  • Audio Inputs, Analog & Digital
    2 (two) stereo line inputs A & B each channel 2601One mono Mic each channel in 2610 & 2612)
    One digital USB input each channel in 2602 and one balanced line (A-B)
  • Inputs/Outputs Level & ImpedanceBalanced MIC= -25 dBu/-80 dBu; 150/250 Ohms
    Balanced LINE = -20 dBu/+22 dBu; 600~ 10Kohms
    Unbalanced AUX = -20 dBu/+15dBu; 600~ 10Kohms
    Balanced Outs; Max Level +26dBu (10K), +20dBm (600ohms)
    Unbalanced Outs; Max Level = +20dBm/600 ohms
  • Phantom PowerMIC inputs have standard 48 V phantom power supply for up to 10 microphones. 48V out is programmed by the user from the front panel
  • Outputs3 stereo bus analog outputs;
    PGM & AUD balanced + 4 dBu;
    SEND Unbalanced + 4 dBu
    1 mono PGM Out L+R unbalanced + 4 dBu
    2 stereo digital AES-3 PGM & AUD, transformer isolated in option /DIG
    2 stereo digital USB PGM & AUD for each 2602 module
    1 stereo digital TCP/IP, PCM WAV or MP3 coded in option /AoIP
    Additional AoIP in/outs on demand
  • Digital LevelAES-3, SPDIF, TCP/IP & USB inputs & outputs;
    0 VU RMS is set at -15 dB Ref Full Digital Scale
    0 dB Peak is set to 100% Full Digtal Scale
  • Tally LightON-AIR signal output (turns on when MIC is open)
    12 V CC @ 0,4 amp (5 x On-Air Tally)
  • Monitor & Hybrid Outputs4 stereo monitor outputs for active speakers and headphones, including internal hedphones distribution Amp (up to 8 headphpnes) in announcer studio.
    1 External Hybrid input + 4 dBu/10K
    1 External Hybrid send output (MIX-Minus) +4 dBu / 10K
    Each 2602 channel has one Mix-Minus out at 0 dBu output
  • CUE Monitor3W mono CUE monitor with internal amplifier & speaker
  • Voice Quality RestorationThe optional 2630 module allows using VQR technology for all the telephone hybrid signals, included external hybrids. It means to restore the cuasi-original voice quality that is impaired during a telephone or cellular communication.
  • Headroom22 dB @ LIN to PGM Ref + 4dBu/10 k
  • Start external devicesOne Start Devices output for each input module, to start external devices when open each channel fader. Out at minijack 1/8″ // Ring = A channel (left side) Tip= B channel (Rigth side) Open collector OFF = Open
    Manages 0 – 24 V DC @ 100 mA
    This allows to control Virtual Rack processors and start audio devices.
  • Frequency response20-20.000 Hz +/- 0.25 dB (LIN or MIC to PGM)
  • NoiseMIC input, EIN=-132 dBu/150 ohms
    LINE input, S/N > 95 dBA at PGM output
  • Dynamic RangeFrom Line to PGM > 110dBA (Better than CD quality)
  • CrosstalkPGM-AUD-SEND > 90 dBA @30-10.000 Hz
    L-R & R-L > 80 dBA @ 1khz
  • DistortionFrom LINE to PGM out < 0.01 % THD @30-15.000 Hz.
    From MIC to PGM out < 0.01 % THD @30-15.000 Hz
  • PhaseFrom Line to PGM, < 2º L&R @50-10.000 Hz
  • Stereo TrackingBelow 0.2 dB error L/R in fader range 0 to 40 dB
  • Telephone Hybrid Specs3 Hybrid inputs, 2 for phone lines and one for cellular phone at 4 wires
    It includes a mini-PBX with Ringer, Line attention with free hands operation, and Line Transfer
    Frequency Response: 250 – 4.000 hz
    Noise: > 60 dBA S/N
    Rejection: > 30 dB rejection measured with standard terrestrial lines
    Rejection adjust: quick Test Mode to adjust the hybrid balance without disturbing On-air operation.
    Preference atenuator: 10 dB local speaker interrupt priority; it can be disabled with internal jumper.
    Automatic On-Air logic: Audio & Logic are managed from a single 100mm slide fader using VCA control, that performs all the operations in error-free mode (CUE= private hands free Talk; Hold with AIR return & Live On Air)

¡Comparte esto con un amigo!

Share on facebook
Facebook
Share on twitter
Twitter
Share on whatsapp
WhatsApp
Share on pinterest
Pinterest